Belay Devices & Descenders

Designed for all users, the GRIGRI is a belay device with assisted blocking for belaying both in the gym and at the crag. The cam-assisted blocking function makes belaying more convenient when a climber is working a route or when catching a fall. The design of the handled camming mechanism enables exceptional descent control. Compact and lightweight, it can be used with all single ropes from 8.5 to 11 mm.

Designed for all users, the GRIGRI is a belay device with assisted blocking for belaying both in the gym and at the crag. The cam-assisted blocking function makes belaying more convenient when a climber is working a route or when catching a fall. The design of the handled camming mechanism enables exceptional descent control. Compact and lightweight, it can be used with all single ropes from 8.5 to 11 mm.

Figure 8 descender, compact and lightweight. Square shape helps reduce rope twist.

Adjustable friction descender for canyoning

Designed for canyoning, the Pirana is an adjustable friction descender intended for expert users and guides. It has three rope installation options to select the degree of friction before initiating a descent. A friction spur allows the user to increase braking power during descent. The plastic ring keeps the connector positioned properly to facilitate rope installation while the device is connected to the harness and limits the risk of dropping the device. A locking slot and an additional spur facilitate rapid creation of a tie-off.

The lightweight Reverso is a multi-functional belay/rappel device designed for rock climbing, multi-pitch climbing and mountaineering. It can be used to belay a climber and to rappel, and in Reverso mode can be used to belay one or two second climbers. The specific design of the rope channels facilitates smooth rope glide and reduces wear. It is compatible with most rope diameters: single 8.5 to 10.5 mm, half 7.1 to 9.2 mm, and twin 6.9 to 9.2 mm.

The lightweight Reverso is a multi-functional belay/rappel device designed for rock climbing, multi-pitch climbing and mountaineering. It can be used to belay a climber and to rappel, and in Reverso mode can be used to belay one or two second climbers. The specific design of the rope channels facilitates smooth rope glide and reduces wear. It is compatible with most rope diameters: single 8.5 to 10.5 mm, half 7.1 to 9.2 mm, and twin 6.9 to 9.2 mm.

The rope end identification kit can be used to replace old labels or to identify individual ropes for professional uses. It contains twenty pre-printed labels and twenty heat-shrink sheaths compatible with 10.5 to 13 mm ropes.

Stop is an assisted-braking descender designed for caving. It is used with 8.5 to 11 mm diameter low stretch kernmantel ropes. It improves descent control and facilitates rope maneuvers. The ergonomic handle makes for particularly comfortable grip and usability. Friction zones are stainless steel, to ensure great durability.